Niko - Orientatieverlichting Wit - 170-38000

Orientation lighting with white LEDs 830 lux, Color temperature: 6500 K (cold white LEDs), claw fixing. The sockets are equipped with plug-in terminals for clamping the wires. All connection terminals can contain up to 2 x 2.5 mm² wire. When mounting in a flush-mounted box with gripping surfaces, claws are used that are opened by means of screws with a mixed screw head (Pz1 or slot 1 x 5 mm). The claws, which have an engagement depth of 31 mm, can be manually pushed back to their original position after unscrewing. These claws can also be easily pushed out with a screwdriver. The flush-mounting frame has a metal thickness of 1 mm and is galvanized on all sides after cutting, including the cut sides. On the horizontal and vertical axis, the flush-mounting frame has 4 inlet slots for mounting in flush-mounted boxes with screws. These inlet slots have a screw hole of 7 mm. For mounting on panels, the flush-mounting frame is provided with 4 screw holes (indicated with a screw symbol) with a diameter of 3 mm. The center of the flush-mounting frame is indicated, both horizontally and vertically, (chalk line, laser ...) so that the mounting of one or more mechanisms can proceed smoothly and easily. On the right and left side, the pedestal has folded up dovetails, making horizontal coupling of several pedestals fast and perfect. The folded-up edges on the outside of the plinth as well as the continuation to the inside provide extra robustness. You can couple the bases vertically with a center-to-center distance of 60 x 71 mm by sliding them together. They lock themselves automatically. For horizontal coupling of bases with a center-to-center distance of 71 mm, the base is provided with two pre-formed lips at the bottom. By folding these lips down over a distance of 1 mm, it rests perfectly on the bottom one and the center-to-center distance of 71 mm is guaranteed. The recessed frame has a dark gray plastic top edge at the top and bottom. This board is made of pc + asa and is connected to the flush-mounting frame via a melting process. The corners of the two top edges are provided with rectangular openings (7.9 x 1.5 mm), each of which contains a multi-position snap hook. The 4 rectangular openings ensure that in case of careless plasterwork, the cover plate can always be fixed flat against the wall thanks to the snap hooks. This works in two directions: if the flush-mounted box protrudes from the plaster, the multi-position snap hooks absorb a play of between 1 and 1.2 mm; if the flush-mounted box is sunk too deep into the plaster, the snap hooks can absorb a play of up to 1.8 mm. The top edges are also provided with 4 round openings that ensure that the cover plate can be correctly positioned in relation to the central plate. then the snap hooks can absorb a play of up to 1.8 mm. The top edges are also provided with 4 round openings that ensure that the cover plate can be correctly positioned in relation to the central plate. then the snap hooks can absorb a play of up to 1.8 mm. The top edges are also provided with 4 round openings that ensure that the cover plate can be correctly positioned in relation to the central plate.LED color: whiteColor temperature: 6500 K (cold white LEDs)Light intensity at the diffuser: 830 luxAll plastic parts are self-extinguishing (comply with a filament test of 650 ° C) and halogen-free.Power consumption: 0.2 W.Degree of protection: The composition of a mechanism, central plate and cover plate has a protection degree IP41.Installation depth: 32 mmDimensions (HxWxD): 45 x 45 mmMarking: CE